In one package you will find 5 waterslide Graffiti Transfers.
One graffiti surface is:
50mm / 1,95 inch high
87mm/ 3,43 inch width
The colours may vary from those shown in the picture depending on the undercoat.
1. We strongly recommend to paint the surface of the terrain
piece with gloss varnish before applying the transfer.
2. Dip the transfer in water for around 30 seconds.
3. Delicately slide the transfer off the paper onto the terrain
piece using finger or brush.
4. Make sure no air is trapped beneath the transfer.
5. After the transfer is completely dry [around 12 hours]
you may gently remove the film.
6. Seal the transfer with matt varnish for best effect.
Designed by Jacyndol